Speedo & Rev counter constantly sticking

Discuss, ask, or get help with engine and mechanical queries in here.

Moderator: Moderators

Post Reply
Osirian08
Newbie
Posts: 3
Joined: Fri Nov 15, 2013 1:57 pm

Speedo & Rev counter constantly sticking

Post by Osirian08 »

Hi All

This problem is slowy driving me up the wall... basically the speedo & rev counter are regularly sticking / freezing in place on my 406 1800cc. The speedo always jams at around the 30mph position.

A hard thump on the dash panel over the dial while under hard acceleration can sometimes cause them to unstick & start working properly again, but the issue always returns. It's been getting steadily worse over time and is now happening virtually every day.

Does anyone know what could be causing this ? When I had my usual garage look at the fault a while back the problem chose not to manifest while they were checking (of course!) and they said they couldn't see anything wrong!

Thanks

Steve
gumby6371
3.0 24v
Posts: 1638
Joined: Thu Jan 28, 2010 9:01 pm
Location: Telford

Re: Speedo & Rev counter constantly sticking

Post by gumby6371 »

Steve,
Is yours a D8 or a D9, (old shape or new shape), the D8's can suffer with dry solder on the back of the clocks which is an easy fix.
1996 1.9 TD LX (Gone but not forgotten)
2003 2.2 HDI SE
GingerMagic
3.0 24v
Posts: 3579
Joined: Fri Apr 06, 2012 9:02 pm
Location: Bournemouth

Re: Speedo & Rev counter constantly sticking

Post by GingerMagic »

The 206 suffers with something similar - I believe it the stepper motor? Not sure if the 406 has one though... :?:
2003 2.2hdi estate - mine
1998 Volvo 940 auto estate - also mine
2019 Citroen C3 something - the wife's
PP2000 user, can help with faults / diagnostics in the Bournemouth area.
Post Reply