Silly Car Park!

Just your normal general chatting in here..

Moderator: Moderators

Post Reply
User avatar
DaiRees
Site Admin
Posts: 5377
Joined: Sat Aug 06, 2005 8:24 am
Location: Merthyr Tydfil, South Wales (God's Country!)

Silly Car Park!

Post by DaiRees »

I wonder how many people have dropped their wheels into this gutter and landed the front bumper on the curb with a nasty thud. Judging by the marks on the curbstones I'd say the answer is "lots" :shock: Idiotic car park design!! :evil:

Image

So if you go to Ikea in Cardiff be careful! :cheesy:
Image
Playtime_Fontayne wrote:"Dai Rees Supplier of Fine Automobilia. Established 2007"
User avatar
mjb
Site Admin
Posts: 7983
Joined: Wed May 31, 2006 9:06 pm
Location: Stoke

Post by mjb »

Wow :shock: That is monumentally bad design! Wonder if the trend continues inside... ;)
User avatar
STALLED
The moderator down under
Posts: 1175
Joined: Sat Jan 06, 2007 6:26 am
Location: Syd - Aus

Post by STALLED »

Thats shite - I'd like to meet the dude who designed that and give him a big slap accross the face!
1997 406 D8 ST Manual 2.0L!

Image
User avatar
mjb
Site Admin
Posts: 7983
Joined: Wed May 31, 2006 9:06 pm
Location: Stoke

Post by mjb »

Nice wheels btw... but I do wonder about the numpties that design ones like that. Must add a good few minutes to the time you're stuck on the hard shoulder in the pouring rain, or in th worst case wishing you'd left the allen key in the glovebox instead of sticking it on the mantelpiece ;)

Actually that reminds me, I still haven't found myself a decent spider wrench. I have right trouble getting my locking nuts off, but the guys in Kwik Fit make it look damn easy with a spider, probably because it keeps the leverage balanced and straight. Any idea where I can get one from? All I've seen so far is a baby one in Halfrauds that wouldn't even give enough torque to take a pedal bike wheel off...
User avatar
DaiRees
Site Admin
Posts: 5377
Joined: Sat Aug 06, 2005 8:24 am
Location: Merthyr Tydfil, South Wales (God's Country!)

Post by DaiRees »

There's no allen key (never thought I'd say that in a thread that mentions Ikea :lol: ), the centre cap just pulls out.

As far as spider wrenches go I had one for a couple of quid from Hyper Value or some such sh*t hole, and bent it within 5 mins :shock: . I then got one of those extending wheelmaster wrenches from B&Q, that's brilliant! Haven't had a problem with the locking bolts yet with it. 8)
Image
Playtime_Fontayne wrote:"Dai Rees Supplier of Fine Automobilia. Established 2007"
User avatar
mjb
Site Admin
Posts: 7983
Joined: Wed May 31, 2006 9:06 pm
Location: Stoke

Post by mjb »

DaiRees wrote: I then got one of those extending wheelmaster wrenches from B&Q, that's brilliant! Haven't had a problem with the locking bolts yet with it. 8)
Did you have a problem with them before? I'm wondering if it's just cos my key is a bit bent :(

I generally use a nice big torque wrench on a short extension, and put a LOT of pressure on the end by the nut just to stop it from twisting the key off the nut. Even then it can take an age to get the stupid things off. I actually did it once on the side of the M6 with the Peugeot wrench... took about 30 minutes to do though!

I'm seriously considering taking a hammer and chisel to the alloys to make them undesirable and just using non-locking nuts
User avatar
neildavies
3.0 24v
Posts: 1052
Joined: Wed Aug 17, 2005 1:00 pm
Location: South Wales, UK

Post by neildavies »

I bought an extendable one in Wilko's for about a fiver, makes the job pss easy. And fits in the boot nicely (although since I've bought mine, it hasn't left my garage)
2007 Mondeo Titanium X 2.0 TDCi
2007 307cc Sport 2.0 HDi 136
Gone but never forgotten: 2002 406 Coupe SE 2.2 HDi
Image
User avatar
DaiRees
Site Admin
Posts: 5377
Joined: Sat Aug 06, 2005 8:24 am
Location: Merthyr Tydfil, South Wales (God's Country!)

Post by DaiRees »

mjb wrote: Did you have a problem with them before? I'm wondering if it's just cos my key is a bit bent :(
No never had a problem with them.

My extendable wheel wrench lives in the zook, me thinks it'll get more use there..... :?
Image
Playtime_Fontayne wrote:"Dai Rees Supplier of Fine Automobilia. Established 2007"
User avatar
jameslxdt
3.0 24v
Posts: 2512
Joined: Wed Apr 26, 2006 9:30 pm
Location: London, on me bike
Contact:

Post by jameslxdt »

i got caught with one of these in my diesel 406, and i ended up pulling the front bumper off, thankfully i wasnt far from work and managed to bodge it all back together
Peugeot wrote:what are you worried about? we made car that lasted 10 years"..."Zat is very goode non? :|
FAQ - 406 D8 petrol (excl. V6) running and starting problems
User avatar
neildavies
3.0 24v
Posts: 1052
Joined: Wed Aug 17, 2005 1:00 pm
Location: South Wales, UK

Post by neildavies »

I'm glad you've told me about this, as the coupe bumpers are know for being flimsy and easy to crack. I doj't think I'd have got it as far as you did Dai.

Then again, I don't go to Ikea anywhere near as much as you. Have you thought about just taking the contents of your wardrobes and sticking your clothes in Ikea, you'd be sorted then. Only problem will be you might get fed up with the amount of visitors you get.
2007 Mondeo Titanium X 2.0 TDCi
2007 307cc Sport 2.0 HDi 136
Gone but never forgotten: 2002 406 Coupe SE 2.2 HDi
Image
User avatar
DaiRees
Site Admin
Posts: 5377
Joined: Sat Aug 06, 2005 8:24 am
Location: Merthyr Tydfil, South Wales (God's Country!)

Post by DaiRees »

neildavies wrote:Then again, I don't go to Ikea anywhere near as much as you. Have you thought about just taking the contents of your wardrobes and sticking your clothes in Ikea, you'd be sorted then. Only problem will be you might get fed up with the amount of visitors you get.
I've got an "Ikea Family" card now.... :cheesy:
Image
Playtime_Fontayne wrote:"Dai Rees Supplier of Fine Automobilia. Established 2007"
Post Reply