Decision made - time to break my 2.2Hdi Exec

[GingerMagic]

Well, after long deliberations and head over heart decisions, the time has come for me to break/strip my old 406.

Its a Monaco Blue ( KMWC ) 2.2Hdi, de-fap, de-EGR. 194,000 miles, good panels ( except the tailgate ) with all the usual executive toys inc. fully working Sat-Nav, ESP

Almost every part is available including the very rare tan leather interior.

( Fan assembly, intercooler, swirl flap connection all allocated, cruise control fitted to replacement car, backplates kept as spares )

If anyone is interested in any parts, please feel free to reply to the topic or PM me.

IMAG0757.jpg

IMAG0759.jpg

IMAG0758.jpg

[hasler88]

What's wrong with the car
Sent from my Lumia 920 using Tapatalk

[GingerMagic]

It has an oil leak between the engine and the gearbox.

The part to replace is £9.95 from europarts - but you need to remove the clutch/DMF to do the fix, and may as well fit a new clutch/DMF afterwards.

Parts are £300 minimum, labour is approx 6 hours @ £40 per hour.....

This is a bit much for a high mileage example, it has worked out cheaper to simply replace the car with a low mileage FSH example.....

[Sagwala]

Hello Buddy,
After the n/s rear wing and light cluster if available please. let me know,
Cheers, Trev.

[GingerMagic]

The nearside rear wing does have some dents/scrapes - although not as bad as yours - I was kinda hoping it was the o/s you were after as this one is excellent.....

I'll take a photo of the wing you are after so you can decide what to do - I didn't realise they were detachable...?

Light cluster is available though.

[Sagwala]

photo would be good.

Your comment about them being detachable ???? Now I don,t actually know, I was just presuming that they would be bolted on.

Would be good if someone could throw some light on it for me.

Cheers.

[GingerMagic]

Just went onto Service box - yes it is a separate section but looks a bit time consuming to remove - although you are welcome to come and have a go.....

IMAG0760.jpg

You can see the long dent/scratch, but it was like this when I got the car - no broken paint or anything.

I haven't figured out yet how to copy the service box details into a thread yet - maybe someone can chip in at this moment, its under 'Bodywork - Rear Wing Inner and Moulding'

Kelv.

[gumby6371]

I always thought the rear quarters needing cutting and welding to swap where it ties into the roof and sills?
Or is that just the saloon?

[Sagwala]

GingeM,,I think I have to agree with Gumsby.
Have changed Front discs and Pads tonight and had a good look round whilst doing it, I think the rear quarter is welded and or pop riveted into the rear boot end.

Definitely looks to be a bodyshop job, more than I could tackle anyway.

I think I will let the insurance write it off, which they will i,m sure, and then let me bodywork mates have a repair on it.

Interested in the light though. How much for it sent up to the Midlands if poss, cheers.

[GingerMagic]

Yes you are probably right, Service Box lists the wing as a separate part, doesn't show how its fixed.....

Rear light £10 inc. postage

[Sagwala]

Great stuff, do you have a Paypal email address, if so , ill pay you now and send my address,
cheers
Trev.

[GingerMagic]

PM sent.

Kelv.

[benczuk]

Kelv,

Can I have swirl flaps control arm linkage please? The bit that connects the ball joint on the flaps shaft to the acctuator arm's hooked end.

I'm sure if I spent a few minutes thinking about it I could come up with some other stuff that would be nice to have, but that is all i *need* currently

[GingerMagic]

Yes mate - already allocated for you.

[hucky]

Hi, how much for your nico pipes? posted to manchester?