Discuss the 406's Bodywork stuff in here (what parts fit what, what can be interchanged with what etc etc).
Moderator: Moderators
ThePrisoner
2.0 Turbo
Posts: 378 Joined: Wed Jan 17, 2007 11:09 pmLocation: Maidstone, Kent
Post
by ThePrisoner Thu Apr 12, 2007 1:09 pm
Been offline for a while due to computer problems!
However during this time I have fitted my welton panel and it looks fantastic!
I have opted for sticking it to my bumper rather than drilling the holes for the bosses!
I used a hacksaw to cut off the bosses and added some super strength double sided adhesive to stick it to the bumper.
It has been on for a couple of weeks now and hasn't started to lift yet and looks great!
Will upload phooto's later when I can be arsed to get dressed and go outside. lol
Pris.
Welly
The moderator formally known as Welton
Posts: 15033 Joined: Tue Jan 10, 2006 12:52 pmLocation: East Midlandfordshire
Post
by Welly Thu Apr 12, 2007 2:24 pm
*shakes fist *
Cars in my care:
k3nny
2.0 16v
Posts: 162 Joined: Fri Apr 07, 2006 6:37 pmLocation: Jakarta - Indonesia
Contact:
Post
by k3nny Thu Apr 12, 2007 5:31 pm
Hahahaha ....
Cars, Computers, Chicks, 3C for a complete life. add a number 6 between them then you get double pleasure. hahaha!
Benner
3.0 24v
Posts: 546 Joined: Tue Feb 06, 2007 9:26 pmLocation: Tonbridge,Kent. UK
Contact:
Post
by Benner Thu Apr 12, 2007 5:49 pm
Welton wrote: *shakes fist *
Whats happened to yours?
trem1
3.0 24v
Posts: 1842 Joined: Sat Dec 31, 2005 2:32 pmLocation: south shields,tyneside
Post
by trem1 Thu Apr 12, 2007 7:43 pm
gonna have to change the name of that panel soon cos everyone's gonna have one bar the namesake
DaiRees
Site Admin
Posts: 5377 Joined: Sat Aug 06, 2005 8:24 amLocation: Merthyr Tydfil, South Wales (God's Country!)
Post
by DaiRees Thu Apr 12, 2007 8:03 pm
Could be one of those ironic names....
Playtime_Fontayne wrote: "Dai Rees Supplier of Fine Automobilia. Established 2007"
jameslxdt
3.0 24v
Posts: 2512 Joined: Wed Apr 26, 2006 9:30 pmLocation: London, on me bike
Contact:
Post
by jameslxdt Thu Apr 12, 2007 8:10 pm
trem1 wrote: gonna have to change the name of that panel soon cos everyone's gonna have one bar the namesake
except those of us with a D8
but the D8 looks better all day long as it is
Benner
3.0 24v
Posts: 546 Joined: Tue Feb 06, 2007 9:26 pmLocation: Tonbridge,Kent. UK
Contact:
Post
by Benner Thu Apr 12, 2007 8:11 pm
jameslxdt wrote: trem1 wrote: gonna have to change the name of that panel soon cos everyone's gonna have one bar the namesake
except those of us with a D8
but the D8 looks better all day long as it is
It certainly does!
Welly
The moderator formally known as Welton
Posts: 15033 Joined: Tue Jan 10, 2006 12:52 pmLocation: East Midlandfordshire
Post
by Welly Fri Apr 13, 2007 7:21 am
Benner wrote: Welton wrote: *shakes fist *
Whats happened to yours?
It was all my idea, but I have not got one yet
I kinda 'fell out' with the car so it wasn't getting a Welton Panel until it behaved itself. But just recently, maybe, just maybe I'll treat it to one.
How much are you guys paying for it, from the dealer???
Cars in my care:
DaiRees
Site Admin
Posts: 5377 Joined: Sat Aug 06, 2005 8:24 amLocation: Merthyr Tydfil, South Wales (God's Country!)
Post
by DaiRees Fri Apr 13, 2007 8:16 am
£30.40 from the stealer, I think Pris got his off eblag though for about £20 delivered?
Playtime_Fontayne wrote: "Dai Rees Supplier of Fine Automobilia. Established 2007"
ThePrisoner
2.0 Turbo
Posts: 378 Joined: Wed Jan 17, 2007 11:09 pmLocation: Maidstone, Kent
Post
by ThePrisoner Fri Apr 13, 2007 6:26 pm
DaiRees wrote: £30.40 from the stealer, I think Pris got his off eblag though for about £20 delivered?
Yup! eBlag for £19.95 including delivery.
Pris.
ThePrisoner
2.0 Turbo
Posts: 378 Joined: Wed Jan 17, 2007 11:09 pmLocation: Maidstone, Kent
Post
by ThePrisoner Tue Apr 24, 2007 6:59 pm
As Promised here are the photo's. Now the ends have started to lift ever so slightly, but this is only noticeable when you get real close. This is becuase I opted for sticking it rather than drilling my bumper.
Check it out... Click on The Photo's To Enlarge Them!
The Front
The Ends
Snug Fit Under The Front Grille/Badge
Pris.
DaiRees
Site Admin
Posts: 5377 Joined: Sat Aug 06, 2005 8:24 amLocation: Merthyr Tydfil, South Wales (God's Country!)
Post
by DaiRees Tue Apr 24, 2007 7:08 pm
Looking good there mate, but she needs a clean....
Playtime_Fontayne wrote: "Dai Rees Supplier of Fine Automobilia. Established 2007"
ThePrisoner
2.0 Turbo
Posts: 378 Joined: Wed Jan 17, 2007 11:09 pmLocation: Maidstone, Kent
Post
by ThePrisoner Tue Apr 24, 2007 7:10 pm
Yes she is absolutely filthy! Oh and forgot to mention I also fitted my new K&N filter as a replacement for the OEM one. I'll let you know what improvement it gives after I driven her tomorrow...
Pris.
Benner
3.0 24v
Posts: 546 Joined: Tue Feb 06, 2007 9:26 pmLocation: Tonbridge,Kent. UK
Contact:
Post
by Benner Tue Apr 24, 2007 9:52 pm
That will be interesting to know, been thinking about getting one myself.
