Pp2000 woes

[Jicjoc]

Hi
I have a 03 coupe hdi remap defap. No bother til a few weeks ago when it goes into limp mode with an anti pollution filter fault if the revs go over 2300. Real pain

So I hook up my pp2000 which I used to remap and few other probs a couple years ago. Worked great then.

Now I have a diff laptop. Win10. Installed vm virtual box and then win xp sp3 I think. Pp2000 office starts fine but when I click pp2000 itself in office it fails to open giving a grey windows box saying control.nt cannot open etc...

Anyone know what this fault is?
I haven't connected it to the car yet this time. Could this be the problem?
Or any other advice?

[GingerMagic]

You need to connect it to the car - and select Peugeot Planet Office, not the diagnostic option...

Let me know how you get on...

[Jicjoc]

Thanks!
You know as I was typing the post I think I realised my error! Will try after work. Be great if that's all the prob was...

Btw is the 406coupe forum dead now anyone know?

[Jicjoc]

ok so same error when connected to car with ignition running

This is the error msg


facebook image upload

Can anyone help!!! Please!
J

[GingerMagic]

The previous server was a bit unreliable, so the Moderators have secured a new server with a more reliable service - but it takes time to transfer everything across.
They are doing it in whatever time they have, as they also have full time jobs etc...

Hopefully when its up and running then it will be much better

Not sure about that error message, my old £30 XP laptop is still going strong - sorry...

Did you say the engine was running?

[PeterN]

I cant get my PP2000 to connect to the car, it gets as far as selecting the car then says it cant connect. I've got two Lexia's and two sets of leads and its the same on both, using an XP laptop.

Peter

[Jicjoc]

Post the error msg peter

[PeterN]

OK thanks, I'm a bit busy at present but when I get a moment I will. I've done it several times but forgotten what is says.

Peter

[OllieNZ]

I can't read the error message in your picture (to blurry)
I recently had an issue with mine.
Win10, Intel i5 6th gen and running xp sp3 on vm ware.
The issue was to do with running 16bit software on a 32bit os being emulated by a 64bit machine. The fix was very simple in the end, download a file and replace add it to xp and configure xp to look at it. I'll find a link to the process later. Took less than 5mins to sort out.

[EdgarDonaldBalls]

I can't read the error message in your picture (to blurry)
I recently had an issue with mine.
Win10, Intel i5 6th gen and running xp sp3 on vm ware.
The issue was to do with running 16bit software on a 32bit os being emulated by a 64bit machine. The fix was very simple in the end, download a file and replace add it to xp and configure xp to look at it. I'll find a link to the process later. Took less than 5mins to sort out.

This is the file you need https://drive.google.com/file/d/0BwlHBe ... sp=sharing

Copy HIDE87.com to c:\windows\system32 directory of the Virtual machine.

Add lh c:\windows\system32\HIDE87.com as the first line to the c:\windows\system32\autoexec.nt file.

reboot the VM.

This should sort it out.

[Jicjoc]

Thank you! Will try later. This has actually riddled my brain. I've tried a million things! Hope it works.j