auto wipers ?

[johntl]

Any ideas guys

when I switch to auto it either wipes on single speed or as most of the time does not work at all, its just on auto setting the rest works ok ?
do you think it is the stalk or the sensor ? has anybody had same issues ??

My car is a 2001 110 hdi

[steve_earwig]

I think that's more likely to be switch.

My car is a 2001 110 hdi

They must have had a sale on Is it com2000?

[johntl]

not sure which type of stalk it is ?
do not think it is comm2000
mine has no sat- nav , rain sensor via stalk, button on end for display function
my car was made near the changeover from 109 bhp to 107 bhp ,I think its 107 ??
can you tell without dismantling ??

[steve_earwig]

Wot, not 110bhp?

It's easy to tell if you know what you're looking for. Plenty of com2000 pics in this thread viewtopic.php?f=10&t=17391 The point being if it isn't and the stalk's goosed then you won't need to sell a kidney to replace it (if it's beyond fettling). If it is com2000 then it would make diagnostics much easier - if you have access to PP2000 anyway...

The reason I think it's the switch is if the sensor's goosed then it should just fall back to a standard intermittent. The way you describe it seems more like it's either not getting far enough for intermittent to work or it's going too far and putting low speed on.

[GingerMagic]

I have a spare stalk here with the button for the trip computer etc..
I bought it for my D8 Coupe ( for trip computer purposes ) but my car has the wrong parts

[steve_earwig]

Can't be asked to log in to Service Box (time for bed, kill downloads, find a proxy server that's in the UK, delete cookies, yadda yadda) but I have a feeling you should check the part numbers.

Would also like to be right about it being the switch, rather than only suspecting it...

[johntl]

took off the top cowl on the steering wheel and got a valeo part no. 61557024
looks like a combined indicator/wiper thingy
any ideas ??

[johntl]

Hi all,

took sensor off, cleaned it, and when switched to auto there no orange light indication
so need to check if sensor getting power when switched on to see if its the sensor or the stalk
Am I right in thinking if the sensor is u/s the wipers go into default setting ?
When sw to auto more and more just goes to single speed

If going to be expensive will manage as is !!!

[steve_earwig]

I think they're meant to go to a default intermittent setting (IIRC I read that over on the coupe klub) but I guess it depends how much is actually wrong with them.

[dirtydirtydiesel]

Mine have always had a mind of their own
On my full - mux estate & my semi - mux coupe

I'd prefer just good ol fashioned intermittent

[johntl]

Just a thought like back the old days!
Is there a way of tapping into the wiring to fit a switch in circuit to turn on an intermitent wipe ???

[johntl]

I see on ebay there is a com2000 repair service for £45 anybody used them ???

[Doggy]

There used to someone doing it for about £29, but I think they were only replacing the little plastic pin that shears off allowing the indicator stalk to go 'floppy'. (You can buy this bit on its own now for coppers). Suspect neither solution will resolve a faulty wiper switch mechanism.

[GingerMagic]

I've used the repair company before - a chap called Graeme Hall.
Good service, reliable and knowledgeable.

[trem1]

I've used the repair company before - a chap called Graeme Hall.
Good service, reliable and knowledgeable.

Known as trustme over on Peugeotforums, lives Bradford area but does a postal service as well

Sent from my K013 using Tapatalk