Blower Fan Stopped Working

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

Post Reply
sawarren88
1.6 8v
Posts: 13
Joined: Sat Dec 30, 2006 8:42 pm
Location: warwickshire

Blower Fan Stopped Working

Post by sawarren88 »

Hi All , Getting the D9 sorted out slowly one fault at at time and then the clutch gave up the ghost. Been running fine since then till today when the blower fan for the ventilation failed to work as soon as I started the car this morning.

It was fine yesterday on my trip to leeds but dead as a dodo today. everrything else works fine - I have checked the fuses ( there is a fuse marked HS in the ventilation fuse slot but that seems ok).

Any ideas or suggestions would be appreciated.

Thanks

Steve
User avatar
Blue406
406 Gimp
Posts: 1147
Joined: Sat Oct 22, 2005 6:08 pm
Location: Fife, Scotland
Contact:

Post by Blue406 »

I had the same issue with my D8.

Worked on my way to a nightshift at work. Refused to work after the 12 hour shift.

Its a simple job to replace though. 3 torx screws and an electrical connecter. It falls right out. You can access it by simply removing the cloth sound damper under the glove box.


A scrapper will ask for £5 to 15 for a pre used one. A good scrapper will let you check it works. (You can fit it on site, its that easy).
Image
Post Reply