problems..... problem.... problems....

nipper76 · Post by **nipper76** » Fri Jul 13, 2007 12:44 pm

you would have thought that.....
but i did ask them, so with the pipe, he got under the car, saw a empty hole under the air box where a peg would go, and stuck it their.... twat

so id rather try and do what i can myself.
at least then, if i know what something should be like, i can make sure it gose like it

Post by **Welly** » Fri Jul 13, 2007 1:00 pm

I see what you mean

niz406 · Post by **niz406** » Sat Jul 14, 2007 11:24 am

The threaded bolt hole on the bell housing could be for one of two things.... mounting points for when the box is overhauled and placed on a jig or its just in the castings as the bell housing is the same for most boxes, its the internals, selectors and clutch linkage that are different... so could be to do with a manual clutch not the hydralic one like you have!

nipper76 · Post by **nipper76** » Sat Jul 14, 2007 6:42 pm

well, you proberly would have thought that, but see-ing as he couldnt even put that pipe on right... then i thought id just get the rest done myself, then i know its done

cheerz again every1 for all your help
any news on what that hole is for??