Hold on, the rest of the lights work so you think it's a fuse? Did you look at the bulbs? If they're ok I think you need to check the wiring 'cos it would be mad to have a separate feed and fuse for the high level light.
Hold on, it is a Peugeot...
Brake Lights
Moderator: Moderators
-
steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: Brake Lights
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
-
406silverhdi
- 2.0 16v
- Posts: 165
- Joined: Sat Jul 14, 2007 9:05 am
Re: Brake Lights
the brake lights are a different elements to the tail lights
replace the correct bulb as a starting point
replace the correct bulb as a starting point
Re: Brake Lights
the pedal sensor would effect all brake lights.
1997 Honda Prelude 2.2 VTi
Previously - 1999 406 Executive HDI
Previously - 1999 406 Executive HDI
Re: Brake Lights
It affects all three brake lights, as I discovered when I was playing around with the switches for the cruise control...supafrisk wrote:I remember a '6 that went for test and had no brake lights, it was a sensor/switch in the driver's footwellCan't remember if it affected the high level one or not though.........
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang