1) drvers heated seat
2) passanger heated seat
3) interior sensor for the alarm?
4) ?????????
So the question is, what should go here? and if its somthing I cant retro fit, any ideas what could go in its place
cheers
Dan
what goes here?
Moderator: Moderators
what goes here?
Is it just me or does anyone else hate to see blanking caps where there should be a switch? The only one I've found on mine (yet) is on the panel where the hand brake is. There is 4 switches and the lock for the airbag. the switches are
1) drvers heated seat
2) passanger heated seat
3) interior sensor for the alarm?
4) ?????????
So the question is, what should go here? and if its somthing I cant retro fit, any ideas what could go in its place
cheers
Dan
1) drvers heated seat
2) passanger heated seat
3) interior sensor for the alarm?
4) ?????????
So the question is, what should go here? and if its somthing I cant retro fit, any ideas what could go in its place
cheers
Dan
'01' black 406 exec saloon
'90' red Lancia Delta Integrale
'02' MG ZT estate
'90' red Lancia Delta Integrale
'02' MG ZT estate
Re: what goes here?
Nothing. Mine have had the alarm switch next to the headlamp adjuster and there's a coin holder where yours is which takes up 2 slots
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
Re: what goes here?
On mine (D9) i've got the two heated seat buttons, alarm interior sensor button then the passenger airbag override lock, so some do have all 4 used
1997 2.1 TD Exec (Sold)
1997 3.0 V6 Coupe S (Sold)
2001 406 HDi 110 GTX (Sold)
2002 406 Coupe HDi SE (RIP)
2003 406 Estate HDi 2.2 SE (Sold)
2003 406 Coupe HDi SE (To be sold)
2001 406 Coupe 3.0 V6 SE
2003 406 2.2 HDi SE
1997 3.0 V6 Coupe S (Sold)
2001 406 HDi 110 GTX (Sold)
2002 406 Coupe HDi SE (RIP)
2003 406 Estate HDi 2.2 SE (Sold)
2003 406 Coupe HDi SE (To be sold)
2001 406 Coupe 3.0 V6 SE
2003 406 2.2 HDi SE
Re: what goes here?
oo hever heard about that one before!
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
Re: what goes here?
I saw a photo on piston heads of a 406 coupe and it had all the spaces used, but it was too blurry to see what it was used for.
'01' black 406 exec saloon
'90' red Lancia Delta Integrale
'02' MG ZT estate
'90' red Lancia Delta Integrale
'02' MG ZT estate
Re: what goes here?
Th
That would be some retro-fit Its for the LPG/Petrol changeover switch 
My HDI execs have five spaces with 1 blanked off, the others are 2 heated seats, alarm & passenger air bag imobiliser.
Dan224 wrote:Is it just me or does anyone else hate to see blanking caps where there should be a switch? The only one I've found on mine (yet) is on the panel where the hand brake is. There is 4 switches and the lock for the airbag. the switches are
1) drvers heated seat
2) passanger heated seat
3) interior sensor for the alarm?
4) ?????????
So the question is, what should go here? and if its somthing I cant retro fit, any ideas what could go in its place
cheers
Dan
That would be some retro-fit Its for the LPG/Petrol changeover switch My HDI execs have five spaces with 1 blanked off, the others are 2 heated seats, alarm & passenger air bag imobiliser.
406 HDI Exec Estate (2 off) & 307CC HDI Cabriolet