wheels.. looking for opinions and advice

Discuss the 406's Bodywork stuff in here (what parts fit what, what can be interchanged with what etc etc).

Moderator: Moderators

Post Reply
User avatar
jbh325i
1.8 16v
Posts: 79
Joined: Tue Aug 18, 2009 1:32 am
Location: Slamannan ( Central Scotland )
Contact:

wheels.. looking for opinions and advice

Post by jbh325i »

Image
got offered a set of these
how would these look on a 406 estate? also there staggered the offset on them are 7 1/2" and 9" wide with 15mm and 20mm
1999 406 glx 2.0 HDI 110bhp
1974 BMW 2002
User avatar
steve_earwig
Moderator
Posts: 19812
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: wheels.. looking for opinions and advice

Post by steve_earwig »

Što?
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
jbh325i
1.8 16v
Posts: 79
Joined: Tue Aug 18, 2009 1:32 am
Location: Slamannan ( Central Scotland )
Contact:

Re: wheels.. looking for opinions and advice

Post by jbh325i »

steve_earwig wrote:Što?
:?
1999 406 glx 2.0 HDI 110bhp
1974 BMW 2002
User avatar
steve_earwig
Moderator
Posts: 19812
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: wheels.. looking for opinions and advice

Post by steve_earwig »

Me no comprende! I reckon they'll look good if they fit but I'm not getting your dimensions.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
jbh325i
1.8 16v
Posts: 79
Joined: Tue Aug 18, 2009 1:32 am
Location: Slamannan ( Central Scotland )
Contact:

Re: wheels.. looking for opinions and advice

Post by jbh325i »

steve_earwig wrote:Me no comprende! I reckon they'll look good if they fit but I'm not getting your dimensions.
ahh i see there staggered so 2 are 7 1/2" wide with 15mm offset the other 2 are 9" wide with and 20mm offset
1999 406 glx 2.0 HDI 110bhp
1974 BMW 2002
User avatar
HimBigChief
3.0 24v
Posts: 1104
Joined: Tue Dec 09, 2008 5:05 pm
Location: Rural Northumberland
Contact:

Re: wheels.. looking for opinions and advice

Post by HimBigChief »

What car have you been offered them off as most Azev's are 4x100mm in my experience. If they are the correct bolt pattern, then fitted and slammed will look well mean and euro! Not 100% whether the backs will overhang the bodywork or not, but with rims that wide you can only try them on the car and if they fit, jobsagoodun! The fronts shouldn't be an issue at all.
Image Image
'98 2.1TD Executive Daily Drive........................................'94 309 Goodwood Project Car
Post Reply