LOOSE HDI COVER

[ruffy]

IVE NOTICED THAT THE DIPSTICK IS STICKIING OUT ABOUT 10mm I THINK ITS BECAUSE THE COVER IS VIBRATING IVE TAKEN THE PLASTIC COVER OFF AND NOTICED THAT THE MOUNTS HAVE BROKEN OFF (2 OUT OF THE 4) ARE THEY EASEY TO REPLACE THANKS TONY,

[jasper5]

If you want a solid repair for this problem buy some Renault exhaust mountings (4) with nuts and washers (6mm thread).

Unscrew the originals from their mounting points and screw in the Renault mountings in their place, fit the cover back on and fit the 6mm nuts and washers....job done.

[ruffy]

thanks mate i think they have broken off,not sure how im going to get them out

[jasper5]

They have a nut at the bottom where they break off, get a socket on them and unbolt them.

[jonti007]

What exactly would you ask for at the renault parts dept to get the bolts you mention. I have exactly the same problem

[jasper5]

Go to a normal motor factor or exhaust fitting place and ask for 4 Renault exhaust mountings (the rubber mountings that have a 6mm bolt at either end, get 4 nuts and washers as well), there is a picture on here somewhere in another thread about this cover, maybe try a search.

[jonti007]

thanks for that

[jasper5]

Here is a picture of the Renault exhaust mountings....

viewtopic.php?f=1&t=6979&p=70005&hilit= ... +up#p70028