starter motor was always cranking

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

Post Reply
chris205
1.6 8v
Posts: 13
Joined: Wed Feb 10, 2010 11:00 am

starter motor was always cranking

Post by chris205 »

hi, i have been having a problem with my 406 coupe 1997 v6 , i got in it one morning and started it but i could hear a strange noise so i turned the engine off and the starter was still cranking. i quickly disconnected the battery to stop it , when i connected it back up it was fine but the starter decided it did not want to work unless i hit it , i have since changed the starter but have had the same problem again. i have removed the engine loom and stripped it to look for any damage but the only damage i found was a slightly burnt connector to the starter solinoid , does anyone know what could cause this as i dont want to fit a new loom and have the problem come back , the ignition barrel seems to be working as normal , cheers
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: starter motor was always cranking

Post by steve_earwig »

Are you p383urw?

I presume you've had the ignition switch apart to see if it's collapsed, does your car have an immobiliser?
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
chris205
1.6 8v
Posts: 13
Joined: Wed Feb 10, 2010 11:00 am

Re: starter motor was always cranking

Post by chris205 »

yeah thats right i am , the ignition switch has been swapped with another one , i have a key pad which has been disonnected. i just dont want to fit a new loom and end up with the same problem
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: starter motor was always cranking

Post by steve_earwig »

Hmm, I was hoping someone would come along with a better understanding of these keypad immobiliser thingies, neither of mine have/had them so I'm not entirely sure how they work, but I would thing that it's more likely to be what's giving you this problem than a short somewhere (though that's not impossible, given the age). Bearing in mind it doesn't cover your car or engine and the diagrams are almost useless, Haynes just shows a wire going off to the keypad teed into the starter motor solenoid feed from the ignition switch :? I'm not sure why it would need this but that's what I'd be looking for right now.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
mjb
Site Admin
Posts: 7983
Joined: Wed May 31, 2006 9:06 pm
Location: Stoke

Re: starter motor was always cranking

Post by mjb »

I'd put my money on either the ignition switch or the relay
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: starter motor was always cranking

Post by steve_earwig »

He says he's changed the ignition switch (2nd hand looks like but two duff the same way?) What relay? Seeing as how the solenoid is a relay in itself why does it exist, something to do with the immobiliser?
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
chris205
1.6 8v
Posts: 13
Joined: Wed Feb 10, 2010 11:00 am

Re: starter motor was always cranking

Post by chris205 »

which relay could it be ?
Post Reply