Hey all
How could I find out which lump is in my 406 (My head is Baffled), also I wan't to change the Cambelt (I have a reasonable mechanical Knowledge) Is this wise??
Your posts would be appreciated
Pete
406 2.0 HDI 110
Moderator: Moderators
-
- 1.8 16v
- Posts: 65
- Joined: Mon Mar 15, 2010 11:35 pm
- Location: Anglesey, North Wales
- Contact:
406 2.0 HDI 110
If you cant find the bright side to life -- Polish the dull side 

- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 406 2.0 HDI 110
Hi there, welcome
That's easy enough - you have a DW10ATED (or RHZ to it's friends).
Changing the cam belt yourself is do-able but it doesn't look like fun. You'll need a set of locking pins for it and the cam belt kit complete with idlers. It also makes sense to change the water pump while you're about it and the crank shaft pulley - these can disintegrate and possible take your engine with them so it's best to change then while you're there. There's a few on here who can help you with it, I've not done not myself though (the last timing belt I did was on a Transit which was a piece of cake)

That's easy enough - you have a DW10ATED (or RHZ to it's friends).
Changing the cam belt yourself is do-able but it doesn't look like fun. You'll need a set of locking pins for it and the cam belt kit complete with idlers. It also makes sense to change the water pump while you're about it and the crank shaft pulley - these can disintegrate and possible take your engine with them so it's best to change then while you're there. There's a few on here who can help you with it, I've not done not myself though (the last timing belt I did was on a Transit which was a piece of cake)
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
-
- 1.8 16v
- Posts: 65
- Joined: Mon Mar 15, 2010 11:35 pm
- Location: Anglesey, North Wales
- Contact:
Re: 406 2.0 HDI 110
Thank god for 406oc, I had set my mind on idlers and a waterpump but had no idea about the Crankshaft pulley
, OMG I bought a Cd workshop manual and having looked at that with regards to my new engine knowledge DW10ATED, I think i'll give changing it myself a miss
, the engine has done 145000 and I cant find any cambelt change in the service history
so better change it as a precaution.
Many thanks for your reply
Pete



Many thanks for your reply

Pete
If you cant find the bright side to life -- Polish the dull side 

-
- 1.8 16v
- Posts: 65
- Joined: Mon Mar 15, 2010 11:35 pm
- Location: Anglesey, North Wales
- Contact:
Re: 406 2.0 HDI 110
Thanks for the Welcome BTW 

If you cant find the bright side to life -- Polish the dull side 

- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 406 2.0 HDI 110
It's always a good plan, I had mine done when I got it despite it having lower miles than recommended - you just don't know where it's been!
Where abouts are you? Maybe someone near you can recommend somewhere that can do it.
Where abouts are you? Maybe someone near you can recommend somewhere that can do it.
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
-
- 1.8 16v
- Posts: 65
- Joined: Mon Mar 15, 2010 11:35 pm
- Location: Anglesey, North Wales
- Contact:
Re: 406 2.0 HDI 110
I agree no point having a decent car outside if its not self propelled!
! i'm in Anglesey, North Wales, the stealer wants £468 not including crankshaft pulley or water pump
i didn't ask if there was Vodka and Tonic on that haha
Pete


Pete
If you cant find the bright side to life -- Polish the dull side 

-
- 1.8 16v
- Posts: 65
- Joined: Mon Mar 15, 2010 11:35 pm
- Location: Anglesey, North Wales
- Contact:
Re: 406 2.0 HDI 110
well thanks to 406oc I had the cam belt changed and had the tensioners, Water pump and Crankshaft pulley changed for £100 plus parts (genuine of course), only to find the water pump was binding and nearly seized, without OC I wouldn't have changed the water pump or Pulley
RESULT, Thanks everyone
Pete
RESULT, Thanks everyone




Pete
If you cant find the bright side to life -- Polish the dull side 

Re: 406 2.0 HDI 110
nice one mate, it is a very handy resource and super friendly folks - unlike some forums I could mention.....ahem golfgtiforum cough cough...
the self same items are on my list too...plus some new injectors to cure my tick.....
welcome to the forum!
the self same items are on my list too...plus some new injectors to cure my tick.....
welcome to the forum!
2001 406 HDi 90 LX saloon with moon miles...