heat shield vibration help needed

Just your normal general chatting in here..

Moderator: Moderators

Post Reply
User avatar
no2lurch
3.0 24v
Posts: 724
Joined: Mon Mar 01, 2010 1:01 am
Location: Cannock, West Mids

heat shield vibration help needed

Post by no2lurch »

on my d9 2.2 sri estate, i am getting a real annoying vibration. i am 100% it is coming from the heat shield between the back box and the bottom of the car (maybe its the petrol tank). it is not touching the exhaust at all and it is firmly attached to the car. when i tap it, i get the same noise, and when the car is idling its vibrating - if i press it, the sound stops.

what can i do to get rid of this annoyance. when i start the car, it sounds loike sommat is about to fall off.

do i need the shield?
Past car - D9 2.2 SRi estate, sleeper, family wagon & general hauler!
Current car - Ph3 1.8 306
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: heat shield vibration help needed

Post by steve_earwig »

Probably, it stops the underside of your car getting hot. Umm, wedge something behind it? Take it off, deform it slightly and put it back again?
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
User avatar
lozz
3.0 24v
Posts: 11908
Joined: Thu Oct 07, 2010 10:18 pm
Location: where-ever

Re: heat shield vibration help needed

Post by lozz »

no2lurch wrote:on my d9 2.2 sri estate, i am getting a real annoying vibration. i am 100% it is coming from the heat shield between the back box and the bottom of the car (maybe its the petrol tank). it is not touching the exhaust at all and it is firmly attached to the car. when i tap it, i get the same noise, and when the car is idling its vibrating - if i press it, the sound stops.

what can i do to get rid of this annoyance. when i start the car, it sounds loike sommat is about to fall off.

do i need the shield?
No mate its there for apurpose but its not needed if its causing anoyance :lol:
Rip it off and fling it,

Rac do it frequently theres plenty of em at the sides of the motorway 8)
FarmerPug
2.0 HDI 110
Posts: 9656
Joined: Tue Jun 01, 2010 5:42 pm
Location: The Countryside, Northern Ireland
Contact:

Re: heat shield vibration help needed

Post by FarmerPug »

bend it a bit see if the new shape sorts the noise.
User avatar
no2lurch
3.0 24v
Posts: 724
Joined: Mon Mar 01, 2010 1:01 am
Location: Cannock, West Mids

Re: heat shield vibration help needed

Post by no2lurch »

can someone please confirm for definate that i can take the shield off? i have deformed it a few times, but it just ends up noisy again.

i think the only thing will be to remove it - as i wont be able to re attached it as the mounts are all corroded.

i just want to make sure i wont be shooting myself in the foot by causing other issues.
Past car - D9 2.2 SRi estate, sleeper, family wagon & general hauler!
Current car - Ph3 1.8 306
User avatar
Welly
The moderator formally known as Welton
Posts: 15033
Joined: Tue Jan 10, 2006 12:52 pm
Location: East Midlandfordshire

Re: heat shield vibration help needed

Post by Welly »

I wouldn't remove it. On a hot day the radiant heat from the eggsauce pipe will be transferred to whatever it is the heat shield is trying to avoid. If it wasn't required then it wouldn't be there in the first place.

You can only wedge something behind it or bend it/put a kink in it.
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
Post Reply