D8 Parts

Gary406 · Post by **Gary406** » Tue Dec 13, 2011 8:15 pm

ive got my d8 sitting out front going nowere for 4 weeks untill my private plate is put on retention soo....

does any1 need any bits off it before it goes to heaven in 4 week.

lozz · Post by **lozz** » Tue Dec 13, 2011 8:23 pm

Hi gaz
do you have to original door speakers,
couid do with a pair ,

Gary406 · Post by **Gary406** » Tue Dec 13, 2011 8:25 pm

i had custom install lozz so threw those standards years ago sorry mate ..

lozz · Post by **lozz** » Tue Dec 13, 2011 8:30 pm

no probs

plod · Post by **plod** » Wed Dec 14, 2011 7:37 pm

you got a rapier dash in there?
if so after the lower dash section on the passenger side in black plus access panels both sides

Gary406 · Post by **Gary406** » Wed Dec 14, 2011 7:41 pm

wen u say lower section do you mean the back section to the glovebox ?

plod · Post by **plod** » Wed Dec 14, 2011 7:46 pm

yes, the lower dash section behind the glovebox

Gary406 · Post by **Gary406** » Wed Dec 14, 2011 7:47 pm

yes i got full glovebox from a rapier all black... let me go check if its not broke cos i think i broke the glovebox door ...

i'll post u sum pictures is 10 mins

plod · Post by **plod** » Wed Dec 14, 2011 7:52 pm

I've got a rapier glovebox, so as long as the soft closure will work, then I just need the rear section in black

Gary406 · Post by **Gary406** » Wed Dec 14, 2011 8:00 pm

yep seems mine is still in tact

Gary406 · Post by **Gary406** » Wed Dec 14, 2011 8:00 pm

just needs a good clean

plus i just spotted on pics its broke were the pin goes in to hold glovebox on

jonsowman · Post by **jonsowman** » Wed Dec 14, 2011 8:56 pm

Is the radiator bottom hose the same as the 2.1TD?

If so, has yours ever been replaced? If it's the factory fitted one its connectors will be rusted to pieces, but if it's new(ish), I'd be interested...

grasmere59 · Post by **grasmere59** » Wed Dec 14, 2011 9:26 pm

lozz wrote:Hi gaz
do you have to original door speakers,
couid do with a pair ,

I've got a pair of standard speakers that came from the front of my old Rapier.

Gary406 · Post by **Gary406** » Wed Dec 14, 2011 9:35 pm

jonsowman wrote:Is the radiator bottom hose the same as the 2.1TD?

If so, has yours ever been replaced? If it's the factory fitted one its connectors will be rusted to pieces, but if it's new(ish), I'd be interested...

its the original one mate rusted to peices . i replaced my radiator 12 months ago and managed to use the original one luckily..

sorry cant help you

gwinter · Post by **gwinter** » Sun Dec 18, 2011 1:29 pm

hi Gary, I'm looking for some screws and fixings. I'll point to this post that I made at Chief's thread. That's floor console rear bolt and dash-to-aircond blower housing screw.

Next are a bunch of screws that secures the wheel arch trim. It's number 71 in the picture below. ServiceBox says there are 31 of them. I need a bunch of them since quite a number have gone missing over the years.

frontWing.jpg

Lastly is the plastic pins that holds down the front grill with the badge. 4 plastic "rivets" as ServiceBox call them, mine's missing 2 in the middle.

I'm trying to restore all the parts best as possible. Maybe you can help? Cheers.

406oc.co.uk

D8 Parts

D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts

Re: D8 Parts