hdi 90bhp cutting out

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

Post Reply
keith68
Newbie
Posts: 6
Joined: Sat May 05, 2012 7:08 am

hdi 90bhp cutting out

Post by keith68 »

hi guys, just wondered if anyone could shed some light on a problem i have with my car.
when i put my foot down in my car it cuts out, i turn off the ignition & then turn it back on & it starts again.
the fault code is p1112 ive changed the fuelrail pressure sensor & ive replaced the lift pump, i had the AA out to it the other day & he wasnt a very very nice man, cos he didnt have a clue, so i thought id come to the professionals & see if you could help me out with this.
User avatar
rwb
3.0 24v
Posts: 2612
Joined: Thu Jun 17, 2010 7:53 pm
Location: Yorkshireman exiled in Salop
Contact:

Re: hdi 90bhp cutting out

Post by rwb »

P1112 Intake Air Temperature (IAT) Sensor Circuit Intermittent Low Voltage

Is that the thing that connects just behind the air filter box?

Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k
User avatar
Doggy
Mod with a 2.2 HDi, De-Fapped!
Posts: 10710
Joined: Mon Oct 13, 2008 11:49 pm
Location: Northants

Re: hdi 90bhp cutting out

Post by Doggy »

Yep, it's part of the MAF - No. 14 below.....
Image

Worth unplugging / plugging in a few times & possibly cleaning.

Seem to recall there was a mod. to separate some of the sensor earth connections to avoid spurious readings, but not sure if it included this fella. :? Anyone remember?
2002 HDi 2.2 Exec Estate, (2008-12) (wonderful)
2003 HDi 2.2 6-speed Exec Estate (2012-19) (also a gem)
2009 Citroen C5 2.0 HDi VTR+ Estate (godawful heap)
2008 BMW E91 330i touring (great fun - murdered by a reversing SUV)
2007 BMW E91 325i touring (slower smoother quieter)
keith68
Newbie
Posts: 6
Joined: Sat May 05, 2012 7:08 am

Re: hdi 90bhp cutting out

Post by keith68 »

well sorry its taken a while to reply to you all, well the news isnt good i had no luck with finding this fault, so i've decided to scrap this car & buy another 1 ( i must be mad )
but let me tell you where i went on finding a possible cure for this.
i took apart every electrical connector on the car & made sure good connections were made & i checked vacuum pipes for splits.
but when the AA man said it might be better to take it into a main dealer it just was'nt worth it.
User avatar
rwb
3.0 24v
Posts: 2612
Joined: Thu Jun 17, 2010 7:53 pm
Location: Yorkshireman exiled in Salop
Contact:

Re: hdi 90bhp cutting out

Post by rwb »

It may not be to do with the connectors but with the sensor itself. Have you tried a new MAF sensor -- in particular in light of busman's experience? (Mine eats throttle position sensors.)

However, I can understand that you're so fed up that you just want shut of it :cry:

Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k
Busman
3.0 24v
Posts: 663
Joined: Mon Oct 29, 2007 2:47 pm
Location: Bridgwater Somerset M5 Junction 24

Re: hdi 90bhp cutting out

Post by Busman »

Yep, sounds to me like a £37 maf sensor would have cured this.
1999 HDI 110 GLX Estate Sold On at 230,000 miles to the lucky John
2003 HDI 110 Rapier Estate
1998 D8 1.9XUD Estate LX 7 seater Estate sold, with regret
1999 306 1.8 petrol.
keith68
Newbie
Posts: 6
Joined: Sat May 05, 2012 7:08 am

Re: hdi 90bhp cutting out

Post by keith68 »

Ok, so they say "its not over till its over" the car is still at home with me & ive thought what the hell. so i'll try this maf sensor, thanks "busman" i used your contact on ebay, it should be here in the next few days. I'll keep you posted.
Busman
3.0 24v
Posts: 663
Joined: Mon Oct 29, 2007 2:47 pm
Location: Bridgwater Somerset M5 Junction 24

Re: hdi 90bhp cutting out

Post by Busman »

keith68 wrote:Ok, so they say "its not over till its over" the car is still at home with me & ive thought what the hell. so i'll try this maf sensor, thanks "busman" i used your contact on ebay, it should be here in the next few days. I'll keep you posted.
You're most welcome, and my fingers are crossed for you. And remember, dont drop the lower one of the 2 screws!
1999 HDI 110 GLX Estate Sold On at 230,000 miles to the lucky John
2003 HDI 110 Rapier Estate
1998 D8 1.9XUD Estate LX 7 seater Estate sold, with regret
1999 306 1.8 petrol.
User avatar
rwb
3.0 24v
Posts: 2612
Joined: Thu Jun 17, 2010 7:53 pm
Location: Yorkshireman exiled in Salop
Contact:

Re: hdi 90bhp cutting out

Post by rwb »

Busman wrote:my fingers are crossed for you
as above

Current: 407 2.2 HDi 170 & C6 2.7 HDi.
Former: 406 1.9 TD; 406 HDi 90; 407 2.2 160; 307cc 180; 508 HDi 140.
Map of PeugeotForums users offering PP2k
keith68
Newbie
Posts: 6
Joined: Sat May 05, 2012 7:08 am

Re: hdi 90bhp cutting out

Post by keith68 »

hey guys, just an update on things, i put the new maf on & guess what? it cut out again! so now is the end of the road for this car.
Matt
2.0 16v
Posts: 180
Joined: Mon Sep 15, 2008 10:41 pm
Location: Birmingham

Re: hdi 90bhp cutting out

Post by Matt »

have you tried the high pressure fuel regulator that located on the high pressure fuel pump? it may have an accumulation of swarf on the very small filter end which can cause the stalling, if you havent already take it out and clean it off with some carb cleaner and see if its any better
2000 2.0 HDI Estate GTX 90 bhp
Post Reply