Master cylinder is under the clutch is it?Captain Jack wrote:Idiot... I think that would be the master clutch cylinder. A pain in the backside to change as there's no space to do it at all! Part itself is cheap though...scotty73 wrote:While bleeding the clutch yesterday the lad helping me thought it a good idea to put pressure on the hard pedal... This resulted in the link bar thingy that attaches to the pedal snappinganyone know what it's called?
Scrap value
Moderator: Moderators
Re: Scrap value
- Captain Jack
- 3.0 24v
- Posts: 3820
- Joined: Sun Aug 07, 2005 11:26 am
- Location: Langford, Somerset
Re: Scrap value
If I am understanding correctly, the rod that is pushed by the pedal snapped? That's the master cylinder there. Or is that something else?
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp
)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp

2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
Re: Scrap value
It feels plastic and I can't get a pic of it i'll try again tomorrow.Captain Jack wrote:If I am understanding correctly, the rod that is pushed by the pedal snapped? That's the master cylinder there. Or is that something else?
Not this is it?
http://www.ebay.co.uk/itm/Clutch-Master ... 461d62061e
- Captain Jack
- 3.0 24v
- Posts: 3820
- Joined: Sun Aug 07, 2005 11:26 am
- Location: Langford, Somerset
Re: Scrap value
Yeah, that's it... Sits right behind the clutch pedal behind the bulkhead.
2003 - 2008: 1998 Peugeot 406 2.1 TD 110bhp LX Saloon
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp
)
2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
2008 - 2009: 2004 Honda Accord 2.2 CDTI 136bhp Executive Saloon
2009 - 2013: 2002 Peugeot 406 2.0 HDI 110bhp Executive Saloon
2013 - 2021: 2007 Peugeot 407 2.2 HDI 170bhp Executive Saloon (mapped to 213bhp

2021 - ????: 2016 Ford Mondeo 2.0 TDCi 180bhp Titanium
Re: Scrap value
Could have done without that extra expense so if anyone got one I can have cheaper?Captain Jack wrote:Yeah, that's it... Sits right behind the clutch pedal behind the bulkhead.

- Welly
- The moderator formally known as Welton
- Posts: 15033
- Joined: Tue Jan 10, 2006 12:52 pm
- Location: East Midlandfordshire
Re: Scrap value
I think you'd be wise to replace the clutch if the car is ok otherwise (and if you like the thing in general).
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
Re: Scrap value
If you put the reg no in this website they will give you an fixed offer. I used them when I scrapped the 306 and the guy turned up with the cheque for the amount stated. http://www.cartakeback.com/
As to the DMF, surely it is poossible to get a solid flywheel from a scrapper that will fit.
As to the DMF, surely it is poossible to get a solid flywheel from a scrapper that will fit.
1998 2.1 GLX TD
Re: Scrap value
I just bought a new car.... And it's not a pug. 

- Welly
- The moderator formally known as Welton
- Posts: 15033
- Joined: Tue Jan 10, 2006 12:52 pm
- Location: East Midlandfordshire
Re: Scrap value
Oh noes not a Voxsall Zaffy?scotty73 wrote:I just bought a new car.... And it's not a pug.
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
Re: Scrap value
Just tried putting the reg for the breaker in and it came back at £85!Rolebama wrote:If you put the reg no in this website they will give you an fixed offer. I used them when I scrapped the 306 and the guy turned up with the cheque for the amount stated. http://www.cartakeback.com/
Now I know it was a couple of years back when I last weighed a 406 in but I got £180 for it and I'm expecting somewher near the £150 mark for this one even after removing the bits I want to keep.
1996 1.9 TD LX (Gone but not forgotten)
2003 2.2 HDI SE
2003 2.2 HDI SE
Re: Scrap value
Nope, It's got a 2.0hdi though. (Not that zaffy's have hdi's but you get me drift)Welly wrote:Oh noes not a Voxsall Zaffy?scotty73 wrote:I just bought a new car.... And it's not a pug.
Gumby It came up at £114 from a place called Pengam partmart through that link... But partmart have their own website to get quotes and mine comes up at £154.
Not sure if there's one near you but try this.
www.partmart.co.uk/sell-my-car
Re: Scrap value
Most likely a Citroen?
Re: Scrap value
04 plate C5PeterN wrote:Most likely a Citroen?

Re: Scrap value
Well done, I have an 01 plate in red. Will ride better than a 406 but doesn't handle quite so well - not that it bothers me as I rarely do more then 60 mph.
Peter
Peter
Re: Scrap value
What's it like on fuel? figures look close to the 406 that's one of the reasons i got it. Mine is the 110 vtr whatever the vtr means.... I pick it up in the morning.PeterN wrote:Well done, I have an 01 plate in red. Will ride better than a 406 but doesn't handle quite so well - not that it bothers me as I rarely do more then 60 mph.
Peter