hello

Talk about the 406's electrical system, what wires do what, how to add extra functionality, etc.

Moderator: Moderators

NinoB
2.2 16v
Posts: 230
Joined: Tue Jul 22, 2014 10:39 am

hello

Post by NinoB »

pls where can i buy original nozzles and coil , plugs for my 406 d9? because my car always misfired every morning or when the engine is cold
User avatar
lozz
3.0 24v
Posts: 11908
Joined: Thu Oct 07, 2010 10:18 pm
Location: where-ever

Re: hello

Post by lozz »

Hi,
some more info might help.

what engine is it?

by coil..do you mean coil pack?

is engine management light on..?
NinoB
2.2 16v
Posts: 230
Joined: Tue Jul 22, 2014 10:39 am

Re: hello

Post by NinoB »

executive 201, ew10, d9, i changed plugs and nozzles several times, but the car is still doing misfire especially early morning if i started the car..then i read on internet that engine coils can cause misfire if they give unsatisfied voltage...well i check the engine sign using pp2k it shows misfire, so i cleared it..(note the plugs and nozzles i change aint brand new, its used)..is it possible to get original ones in ebay
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: hello

Post by steve_earwig »

By nozzles, do you mean injectors or the spark plug extensions?
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
NinoB
2.2 16v
Posts: 230
Joined: Tue Jul 22, 2014 10:39 am

Re: hello

Post by NinoB »

yea i changed both.. now i want to buy all original..including the engine coil
NinoB
2.2 16v
Posts: 230
Joined: Tue Jul 22, 2014 10:39 am

Re: hello

Post by NinoB »

any suggestion or even a link from ebay where i can original
NinoB
2.2 16v
Posts: 230
Joined: Tue Jul 22, 2014 10:39 am

Re: hello

Post by NinoB »

@steve..my English is bad thou..i mean injection nozzles
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: hello

Post by steve_earwig »

I was wondering but I checked your IP and it came back GB :?

So, which are you after, the coil pack or the injectors?

From the original question I think you want the coil pack, I had a quick look on ebay but they weren't much cheaper than Peugeot and it didn't say if they were original.

If you want to look the number for the coil pack is 597098. For the injectors it's 1984E2.
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
NinoB
2.2 16v
Posts: 230
Joined: Tue Jul 22, 2014 10:39 am

Re: hello

Post by NinoB »

Yea I want the coil pack and the injectors too..but I wish I can get original.. the numbers u gave is what I will use on my search in ebay or what?
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: hello

Post by steve_earwig »

Well yes. Either that or just use your engine - 406 2.0 coil pack/injector but I'd have thought you'd tried that already. The part number "should" get you OEM (should but it depends how honest the seller is)
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
NinoB
2.2 16v
Posts: 230
Joined: Tue Jul 22, 2014 10:39 am

Re: hello

Post by NinoB »

Okay
NinoB
2.2 16v
Posts: 230
Joined: Tue Jul 22, 2014 10:39 am

Re: hello

Post by NinoB »

hello
the seller was asking me about the OEM part number of my ignition coil, well i dont know how to get it, can someone help me please because i cant loose my engine cover,
any suggestions?

regards
NinoB
2.2 16v
Posts: 230
Joined: Tue Jul 22, 2014 10:39 am

Re: hello

Post by NinoB »

Hi Steve, pls any ideas?
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: hello

Post by steve_earwig »

You can't loose your engine cover? You can't loosen/remove it?

What's up with this?
steve_earwig wrote:the number for the coil pack is 597098.
Or are you after the manufacturer's part number? (i.e. Bosch or Siemens or whatever)
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
NinoB
2.2 16v
Posts: 230
Joined: Tue Jul 22, 2014 10:39 am

Re: hello

Post by NinoB »

The seller asked me about the OEM part number, which I guess it just a mere number, I thought there's a database that can rectify the part number if I provide my VIN? Which is easier.. something like dialogue box!!

Nevertheless, I will still open the cover and see if the part number is visible on top of the ignition coil.
Post Reply