hello
Moderator: Moderators
Re: hello
executive 201, ew10, d9, i changed plugs and nozzles several times, but the car is still doing misfire especially early morning if i started the car..then i read on internet that engine coils can cause misfire if they give unsatisfied voltage...well i check the engine sign using pp2k it shows misfire, so i cleared it..(note the plugs and nozzles i change aint brand new, its used)..is it possible to get original ones in ebay
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: hello
By nozzles, do you mean injectors or the spark plug extensions?
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: hello
I was wondering but I checked your IP and it came back GB
So, which are you after, the coil pack or the injectors?
From the original question I think you want the coil pack, I had a quick look on ebay but they weren't much cheaper than Peugeot and it didn't say if they were original.
If you want to look the number for the coil pack is 597098. For the injectors it's 1984E2.

So, which are you after, the coil pack or the injectors?
From the original question I think you want the coil pack, I had a quick look on ebay but they weren't much cheaper than Peugeot and it didn't say if they were original.
If you want to look the number for the coil pack is 597098. For the injectors it's 1984E2.
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: hello
Well yes. Either that or just use your engine - 406 2.0 coil pack/injector but I'd have thought you'd tried that already. The part number "should" get you OEM (should but it depends how honest the seller is)
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
- steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: hello
You can't loose your engine cover? You can't loosen/remove it?
What's up with this?
What's up with this?
Or are you after the manufacturer's part number? (i.e. Bosch or Siemens or whatever)steve_earwig wrote:the number for the coil pack is 597098.
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.
Re: hello
The seller asked me about the OEM part number, which I guess it just a mere number, I thought there's a database that can rectify the part number if I provide my VIN? Which is easier.. something like dialogue box!!
Nevertheless, I will still open the cover and see if the part number is visible on top of the ignition coil.
Nevertheless, I will still open the cover and see if the part number is visible on top of the ignition coil.