belt tensioner - where from?

Discuss, ask, or get help with engine and mechanical queries in here.

Moderator: Moderators

Post Reply
locoboy
1.8 16v
Posts: 76
Joined: Wed Oct 31, 2007 10:58 am

belt tensioner - where from?

Post by locoboy »

I have a 1998 (R) 2.1td with air con and my aux belt tensioner is giving up the ghost.

I had the pully changed 12 months ago but decided against the extra cost of the tensioner as i was not planning on keeping the car.............well 12months on and it needs doing.

I have looked at the GSF website and can only find cam belt tensioners.

Any ideas on cheap alternative suppliers?

Thanks in advance
mbell666
3.0 24v
Posts: 642
Joined: Mon Aug 08, 2005 10:11 pm
Location: Cambridge

Re: belt tensioner - where from?

Post by mbell666 »

Try:

http://www.eurocarparts.com/

Normally a little chep and have more parts on their website.
1997 Honda Prelude 2.2 VTi
Previously - 1999 406 Executive HDI
munfred
2.0 16v
Posts: 155
Joined: Thu Jul 06, 2006 10:15 pm
Location: Bedford
Contact:

Re: belt tensioner - where from?

Post by munfred »

got mine from peugeot, as local motor factors didnt do them.
I think it was £56, and wasnt too difficult to change, but bent up a couple of my allen keys which the haynes suggests you use to lock the holes.
teamster1975
Site Admin & Mad Biker!
Posts: 6277
Joined: Sun Oct 28, 2007 8:07 pm
Location: Woking, Surrey

Re: belt tensioner - where from?

Post by teamster1975 »

munfred wrote:but bent up a couple of my allen keys which the haynes suggests
I've got a selection of old drill bits for that job!!
1996 406 1.8LX Got a bad case of hydro lock!
1996 406 Executive 2.0 Turbo XU10J2TE No longer hangin' on in there :(
1997 Honda CB500V
2003 Volvo V40 1.8 GDi SE killed by a nutter in a beemer 5 series
2008 Mondeo 2.0 TDCi Titanium X

"Always look on the bright side of life, dedo, dedo dedodedo"
locoboy
1.8 16v
Posts: 76
Joined: Wed Oct 31, 2007 10:58 am

Re: belt tensioner - where from?

Post by locoboy »

I have spoken to GSF and Euro car parts and they seemed to be offering me different things!

I had the pulley replaced 12 months ago becasue the bearings were shot in it and it was squeeking like mad and you could see the belt wandering on it.

GSF offered the spring damper on its own.

Is the whole tensioner assembly a 2 part item, ie pully and spring damper (the bit that looks like a shocker) or are there more bits involved?

If its 2 part then i only want the damper bit dont i?

If its 3 part then what is the 3rd part!

Tell me to wee off if you dont know!
munfred
2.0 16v
Posts: 155
Joined: Thu Jul 06, 2006 10:15 pm
Location: Bedford
Contact:

Re: belt tensioner - where from?

Post by munfred »

The tensioner that I changed was a 1 piece unit. sorry cant remember much else at the moment.
Post Reply