Brake Hoses

Discuss, ask, or get help with engine and mechanical queries in here.

Moderator: Moderators

Post Reply
User avatar
sockpuppet
2.0 16v
Posts: 148
Joined: Fri Nov 06, 2009 6:15 pm
Location: Sunderland

Brake Hoses

Post by sockpuppet »

my 406 failed its MOT today at Kwik Fit (what was I thinking?!)

The front brake hoses are worn, and need replacing, and also the exhaust link pipe needs replacing.

I immediately went round to my girlfriends brothers garage, where he told me kwik fit like to make stuff up, and that if he'd done the MOT he wouldnt even have mentioned the exhaust pipe (hence im going to him for the retest so I dont have to spend a fortune getting the link pipe changed).

he agreed that the brake hoses need changing though. just wondering what should i expect to pay, because he says he can get them for about £20 for me, whereas Kwik Fit said £45 EACH, not including fitting, so im wondering if Kwik Fit are trying to sodomise my bank balance? they also quoted me £110 for a link pipe, which im sure is a bit of a joke.
Image

406 2.0 HDi Rapier, 2003 plate
User avatar
steve_earwig
Moderator
Posts: 19813
Joined: Thu Oct 04, 2007 6:09 pm
Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/

Re: Brake Hoses

Post by steve_earwig »

45 quid EACH?? That's more than Pug!! GSF want 12.25 a side for V6 coupe ones (all they do), so 20 quid sounds ok. There seems to be lots so make sure you get the right ones.

Btw if you go near Quickfit again I'll ban ya :P
Unskilled meddling sin©e 2007

The submitted form was invalid. Try submitting again.
mandelbug
2.0 16v
Posts: 139
Joined: Mon Feb 08, 2010 6:15 am
Location: London

Re: Brake Hoses

Post by mandelbug »

I just got a complete set of braided hoses (front and rear) for £43 +5 p&p on ebay. Delivery was just over 24 hours.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWNX:IT

That is the auction I got mine from. Fitting the fronts was a fairly easy job to be fair. Took longer cleaning everything up.
omega
3.0 24v
Posts: 1745
Joined: Wed Dec 31, 2008 12:25 am
Location: nottingham

Re: Brake Hoses

Post by omega »

me ....how much to fit front discs and pads on a 406 2.1 diesel?
kwikfit...235 pounds!!!
me.....goodbye

this was on saturday in notts
User avatar
highlander
PowerFlow Shill
Posts: 3548
Joined: Sun Nov 09, 2008 5:03 pm
Location: Aberdeen

Re: Brake Hoses

Post by highlander »

Me: The exhaust on my 1.2 Clio is rattly at the back, the backbox seems to move around a bit when I press on the tail pipe
Kwik-Fit: You'll need to replace the whole exhaust, it's rusted to hell. £425 please.
Me: ... see ya

Took it back to the bloke I bought it off, who happened to be a mechanic and MOT tester, and he said "Nah, just needs a weld; the join between the pipe and the back box is snapped, but it's clean". He did it free of charge, took him about 10 minutes. Did me fine til I part-exed the car a year later for the 406 :)
2002 (D9) Peugeot 406 Coupe SE, 2.2 litre Petrol. Scarlet Red/Rouge Ecarlate/Rosso Scarlatto. Black Leather interior. SOLD :(
2008 (E60 LCI) BMW 525i M-Sport, 3.0 litre Petrol. Carbonschwarz Metallic. Black Dakota Leather and Myrtlewood interior.
roton600
1.8 8v
Posts: 25
Joined: Thu Nov 19, 2009 8:54 pm

Re: Brake Hoses

Post by roton600 »

The discs and pads would only be about £65 to £75 from local motor factors like eurocarparts, really easy to do yourself...or go to your local independant should be about £150 tops, Mr Clutch is £155, even Mr Peugeot would only be about £180ish
User avatar
mjb
Site Admin
Posts: 7983
Joined: Wed May 31, 2006 9:06 pm
Location: Stoke

Re: Brake Hoses

Post by mjb »

My coupe's front brake hoses are dealer-only, and I think they weighed in at about £25 each. Only took me about 30 mins to change and bleed them too
<steve_earwig> I think this forum is more about keeping our cars going with minimal outlay than giving our cars more reason to go bang
Post Reply