Cooling fan.... my fan is on its way out... as in bearings are going... so taken it off and been to loads of breakers, and can not find one with the same type of plug... all the ones i can are a twin spade connector type that plugs on the back on the motor... mine... has a rectangle plug with the top left corner missing containing 5 pins with 4 wires running of it,....... ive try ed every where ,,, and at 200.00 quid for a gen one... i,m not that keen!!
I know its a twin speed speed /single fan... but just cant seem to get one.. can any one help???
406 hdi 53plate cooling fan
Moderator: Moderators
-
Welly
- The moderator formally known as Welton
- Posts: 15033
- Joined: Tue Jan 10, 2006 12:52 pm
- Location: East Midlandfordshire
Re: 406 hdi 53plate cooling fan
I bought one for my 1999 (single fan) and it was £129.00 from Europarts (it came in a Peugeot/Citroen box). Yours might be an updated one because of the multiplex wiring?
A *lot* of searching the national breakers/ebay might bag you one but most front-end write offs will have destroyed the fan
A *lot* of searching the national breakers/ebay might bag you one but most front-end write offs will have destroyed the fan
Cars in my care:
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
2021 Kia Spottage 1.6 Pez Turbo Dual Clutch Gearbox Trickery
2013 Renner Twingo - donkey work
-
steve_earwig
- Moderator
- Posts: 19813
- Joined: Thu Oct 04, 2007 6:09 pm
- Location: Jastrebarsko, Croatia http://www.jastrebarsko.hr/lokacija/
Re: 406 hdi 53plate cooling fan
Looks like you need one from a car built from 2001 onwards (multihex)
Unskilled meddling sin©e 2007
The submitted form was invalid. Try submitting again.
The submitted form was invalid. Try submitting again.